PRICE LIST: Grinding Fixtures & Accessories
Effective: January 1, 2012
Effective: January 1, 2012
| 265-100 | BUR-BEAVER MODEL BB-920 (tabletop unit w/1 18 flute cutter) | $1540.00 |
| 265-50 | BUR-BEAVER GUIDE (permits deburring the OD of flat rounds) | $ 190.00 |
| 92044 | BB-35Q 27-FLUTE CUTTER (for fine finishes min. depth chamfers on steel) | $ 90.00 |
| 92045 | BB-35R BORAZON WHEEL (deburrs stainless and hardened steel) | $ 120.00 |
| 92046 | BB-35N 9-FLUTE CUTTER (deburrs and chamfers aluminum, plastic, castiron) | $ 65.00 |
| 92047 | BB-35S CROSSHATCH CUTTER (for fine finish deburrin of steel) | $ 70.00 |
| 92048 | BB-35P 18-FLUTE CUTTER (for medium finish chamfers on steel to 1/8") | $ 75.00 |
| 010-100 | HARIG GRIND-ALL FIXTURE NO.1 (with carrying case) | $2340.00 |
| 015-100 | BASE-PLATE & TAIL-STOCK (11" with rail) | $1090.00 |
| 016-100 | BASE-PLATE & TAIL-STOCK (18" with rail) | $1590.00 |
| 055-100 | SINE-PLATE (4"x6" single angle with rail) | $ 840.00 |
| 065-100 | SUPER WEE-BLOCKS (with case) | $ 115 .00 |
| 075-100 | RECTANGLE-JAWS (with case) | $ 160.00 |
| 085-100 | HITE-ANGLE PLATE (with rail) | $ 720.00 |
| 105-100 | SINE-CHUCK (6"x6" permanent magnet single angle with 2 rails) | $1590.00 |
| 135-100 | STEADY-REST | $ 125.00 |
| 10-40 | MAGNETIC CHUCK (4" diameter fine pole) | $1250.00 |
| 10-52 | RADIUS DRESSER ARM | $ 155.00 |
| 91002 | O.D. DIAMOND (#7) | $ 75.00 |
| 91003 | I.D. DIAMOND NIB (.020) | $ 78.00 |
| 10-55 | BALL-SEAT PUNCH ADAPTOR | $ 420.00 |
| 10-56 | NIBS FOR BALL-SEAT PUNCH ADAPTER (1/4" diameter) | $ 60.00 |
| 10-57 | NIBS FOR BALL-SEAT PUNCH ADAPTER (5/16" diameter) | $ 62.00 |
| 10-58 | NIBS FOR BALL-SEAT PUNCH ADAPTER (3/8" diameter) | $ 66.00 |
| 10-59 | NIBS FOR BALL-SEAT PUNCH ADAPTER (1/2" diameter) | $ 69.00 |
| 10-60 | NIBS FOR BALL-SEAT PUNCH ADAPTER (3/4" diameter) | $ 72.00 |
| 10-70 | MOTO-GRIND (w/ motor, base-plate, belt & case - for light duty work) | $1090.00 |
| 10-90 | FACE-PLATE (6" diameter - hardened) | $ 190.00 |
| 10-95 | LENGTH-STOP | $ 190.00 |
| 020-100 | HARIG GRIND-ALL NO.2 | $3890.00 |
| 021-100 | HARIG GRIND-ALL NO.2 (with rotary table mechanism) | $4290.00 |
| 065-100 | SUPER WEE-BLOCKS (with case) | $ 115.00 |
| 075-100 | RECTANGLE-JAWS (with case) | $ 160.00 |
| 105-100 | SINE-CHUCK (6"x6" permanent magnet single angle with 2 rails) | $1590.00 |
| 135-100 | STEADY-REST | $ 125 .00 |
| 10-52 | RADIUS DRESSER ARM | $ 155.00 |
| 91002 | O.D. DIAMOND NIB (#7) | $ 75.00 |
| 91003 | I.D. DIAMOND NIB FOR (.020) | $ 78.00 |
| 20-60 | BALL-SEAT PUNCH ADAPTER | $ 450.00 |
| 10-56 | NIBS FOR BALL-SEAT ADAPTER (1/4" diameter) | $ 60.00 |
| 10-57 | NIBS FOR BALL-SEAT ADAPTER (5/16" diameter) | $ 62.00 |
| 10-58 | NIBS FOR BALL-SEAT ADAPTER (3/8" diameter) | $ 66.00 |
| 10-59 | NIBS FOR BALL-SEAT ADAPTER (1/2" diameter) | $ 69.00 |
| 10-60 | NIBS FOR BALL-SEAT ADAPTER (3/4" diameter) | $ 72.00 |
| 20-50 | ROTARY TABLE MECHANISM KIT | $ 480.00 |
| 20-65 | CARRYING CASE | $ 110.00 |
| 20-70 | NO.2 MOTOR ATTACHMENT (w/ motor, bracket & belt - light duty work) | $ 590.00 |
| 060-100 | HARIG DUO-FORM (with carrying case) | $4490.00 |
| 015-100 | BASE-PLATE & TAIL-STOCK (11" with rail) | $1090.00 |
| 016-100 | BASE-PLATE & TAIL-STOCK (18" with rail) | $1590.00 |
| 055-100 | SINE-PLATE (4"x6" single angle with rail) | $ 840.00 |
| 065-100 | SUPER WEE-BLOCKS (with case) | $ 115.00 |
| 075-100 | RECTANGLE-JAWS (with case) | $ 160.00 |
| 085-100 | HITE-ANGLE PLATE (with rail) | $ 720.00 |
| 105-100 | SINE-CHUCK (6"x6" permanent magnet single angle with 2 rails) | $1590.00 |
| 106-100 | FINE-POLE SIN-CHUCK (6"x6" permanent magnet single angle with 2 rails) | $1890.00 |
| 135-100 | STEADY-REST | $ 125.00 |
| 10-52 | RADIUS DRESSER ARM | $ 155.00 |
| 91002 | O.D. DIAMOND (#7) | $ 75.00 |
| 91003 | I.D. DIAMOND NIB (.020) | $ 78.00 |
| 215-100 | HARIG ULTRA-GRIND NO. 5C-V (w/v-block, 1/2" 5C collet & case) | $2990.00 |
| 210-70 | ULTRA-GRIND MOTOR ATTACHMENT (w/motor, bracket & belt) | $ 540.00 |
| 015-100 | BASE PLATE & TAIL-STOCK (11" with rail) | $1090.00 |
| 016-100 | BASE-PLATE & TAIL-STOCK (18" with rail) | $1590.00 |
| 055-100 | SINE-PLATE (4"x6" single angle with rail) | $ 840.00 |
| 065-100 | SUPER WEE-BLOCKS (with case) | $ 115.00 |
| 075-100 | RECTANGLE-JAWS (with case) | $ 160.00 |
| 085-100 | HITE-ANGLE PLATE (with rail) | $ 720.00 |
| 105-100 | SINE-CHUCK (6"x6" permanent magnet single angle with 2 rails) | $1590.00 |
| 106-100 | FINE-POLE SINE-CHUCK (6"x6" permanent magnet single angle with 2 rails) | $1890.00 |
| 120-50 | FACE-PLATE (5" diameter, soft with adapter shank) | $ 190.00 |
| 120-60 | 3-JAW CHUCK (with reversible jaws & adapter shank) | $1040.00 |
| 120-70 | MAGNETIC-CHUCK (5" diameter with adapter shank) | $1090.00 |
| 135-100 | STEADY-REST | $ 125.00 |
| 10-52 | RADIUS DRESSER ARM | $ 155.00 |
| 91002 | O.D. DIAMOND (#7) | $ 75.00 |
| 91003 | I.D. DIAMOND NIB (.020) | $ 78.00 |
| 070-100 | UNI-DEX (with 1/2" 5C collet & carrying case) | $1990.00 |
| 015-100 | BASE-PLATE & TAIL-STOCK (11" with rail) | $1090.00 |
| 016-100 | BASE-PLATE & TAIL-STOCK (18" with rail) | $1590.00 |
| 055-100 | SINE-PLATE (4"x6" single angle with rail) | $ 840.00 |
| 085-100 | HITE-ANGLE ANGLE PLATE (with rail) | $ 720.00 |
| 105-100 | SINE-CHUCK (6"x6" permanent magnet single angle with 2 rails) | $1590.00 |
| 106-100 | FINE-POLE SINE-CHUCK (6"x6" permanent magnet single angle with 2 rails) | $1890.00 |
| 120-50 | FACE-PLATE (5" diameter, soft with adapter shank) | $ 190.00 |
| 120-60 | 3-JAW CHUCK (with reversible jaws & adapter shank) | $1040.00 |
| 120-70 | MAGNETIC CHUCK (5" diameter with adapter shank) | $1090.00 |
| 135-100 | STEADY-REST | $ 125.00 |
| 70-70 | MOTO-GRIND (w/ motor, base-plate, bracket, belt & case - light duty work) | $1090.00 |
| 120-100 | MOTORIZED SPIN-INDEXER | $1550.00 |
| 122-100 | MANUAL SPIN-INDEXER | $1090.00 |
| 105-100 | SINE-CHUCK (6" x 6" permanent magnet single angle with 2 rails) | $1590.00 |
| 106-100 | FINE-POLE SINE-CHUCK (6" x 6" permanent magnet single angle with 2 rails) | $1890.00 |
| 120-50 | FACE-PLATE (5" diameter, soft with adapter shank) | $ 190.00 |
| 120-60 | 3-JAW CHUCK (with reversible jaws & adapter shank) | $1040.00 |
| 120-70 | MAGNETIC CHUCK (5" diameter with adapter shank) | $1090.00 |
| 120-80 | MOTOR ATTACHMENT (w/motor, bracket & belt - motorizes manual unit) | $ 495.00 |
| 125-100 | SINE-PLATE (4.5"x6" single angle with rail) | $ 860.00 |
| 130-100 | ADAPTER-PLATE (12" long) | $ 890.00 |
| 135-100 | STEADY-REST | $ 125.00 |
| 140-100 | MANUAL COLLET CLOSER | $ 90.00 |
| 145-100 | COLLET STOP SET (4 piece set) | $ 70.00 |
| 150-100 | COLLET STOP | $ 50.00 |
| 165-100 | AIR COLLET CLOSER (for use with motorized Spin-Indexer) | $ 790.00 |
| 91005 | DIAMOND NIB | $ 27.00 |
| 030-100 | TRU-DEX WHEEL DRESSER (with 12" wheel capacity arm & case) | $2490.00 |
| 035-100 | PLANNER-GAGE (with case) | $ 410.00 |
| 91002 | O.D. DIAMOND NIB (#7) | $ 75.00 |
| 91003 | I.D. DIAMOND NIB (.020) | $ 78.00 |
| 025-100 | LECTRIC-CENTERS (with 11" base-plate & carrying case) | $1990.00 |
| 15-30 | 18" BASE-PLATE (with rail) | $ 990.00 |
| 055-100 | SINE-PLATE (4"x6" single angle with rail) | $ 840.00 |
| 105-100 | SINE-CHUCK (6"x6" permanent magnet single angle with 2 rails) | $1590.00 |
| 106-100 | FINE-POLE SINE-CHUCK (6"x6" permanent magnet single angle with 2 rails) | $1890.00 |
| 25-40 | CARBIDE HEAD STOCK CENTER | $ 260.00 |
| 25-41 | CARBIDE TAIL STOCK CENTER | $ 210.00 |
| 91005 | DIAMOND NIB | $ 27.00 |
| 240-40 | KOOL-GRIND PLATE #44 (w/6' Plate Tubing quick disconnect fittings) | $1090.00 |
| 240-60 | KOOL-GRIND CHUCK #612 (6' Chuck Tubing quick disconnect fittings) | $2290.00 |
| 240-100 | KOOL-GRIND CHILLER (quick disconnect fittings and 1 gallon Koolant) | $2140.00 |
| 240-61 | MANUAL RELEASE CONTROL (for Kool-Grind Chuck No. 612) | $ 570.00 |
| 240-62 | AUTOMATIC RELEASE CONTROL (for Kool-Grind Chuck No. 612) | $1100.00 |
| 240-04 | 4' UNIVERSAL EXTENSION TUBING (w/quick disconnect fittings) | $ 110.00 |
| 240-10 | KOOL-GRIND KOOLANT (1 gallon) | $ 30.00 |
| 245-100 | 20mm EDM INDEXER (#3R-321.2 mini manual chuck)w/carrying case | $4700.00 |
| 250-100 | MC EDM INDEXER (#3R-460.34 manual combi chuck) w/carrying case | $4900.00 |
| 255-100 | EDM MAGNETIC REFERENCE CHUCK (6" x 6") | $1190.00 |
| 170-100 | MODEL E-5 ROTO-SPINDLE | $1590.00 |
| 170-70 | COLLET SET OF 12 (for use with E-5 Roto-Spindle) | $ 450.00 |
| 170-71 | (.039-.079) ER-20 or RD-20 COLLETS | $ 40.00 |
| 170-72 | (.079-.118) ER or RD-20 COLLETS | $ 40.00 |
| 170-73 | (.118-.157) ER or RD-20 COLLETS | $ 40.00 |
| 170-74 | (.157-.192) ER or RD-20 COLLETS | $ 40.00 |
| 170-75 | (.192-.236) ER or RD-20 COLLETS | $ 40.00 |
| 170-76 | (.236-.276) ER or RD-20 COLLETS | $ 40.00 |
| 170-77 | (.276-.315) ER or RD-20 COLLETS | $ 40.00 |
| 170-78 | (.315-.354) ER or RD-20 COLLETS | $ 40.00 |
| 170-79 | (.354-.394) ER or RD-20 COLLETS | $ 40.00 |
| 170-80 | (.394-.433) ER or RD-20 COLLETS | $ 40.00 |
| 170-81 | (.433-.472) ER or RD-20 COLLETS | $ 40.00 |
| 170-82 | (.472-.512) ER or RD-20 COLLETS | $ 40.00 |
| 175-100 | MODEL E-20 ROTO-SPINDLE | $1640.00 |
| 161-100 | E-20 COLLET CHUCK | $ 125.00 |
| 155-100 | MODEL E-5 FLUSH-CHUCK (with 1/2" diameter shank) | $ 420.00 |
| 160-100 | MODEL E-20 FLUSH-CHUCK (with 20mm diameter shank) | $ 440.00 |
| 040-100 | TWIN-ANGLE NO.1 (with 2 clamps) | $ 520.00 |
| 185-100 | TWIN-ANGLE NO.2 (with 2 clamps) | $ 590.00 |
| 40-02 | 3/4" DIAMETER SHANK (for Twin-Angle) | $ 48.00 |
| 40-04 | 20mm DIAMETER SHANK (for Twin-Angle) | $ 48.00 |
| 190-100 | ADJUSTA-V (with 1" diameter shank) | $ 950.00 |
| 191-100 | ADJUSTA-V (with 20mm diameter shank) | $ 950.00 |
| 192-100 | ADJUSTA-V (with 30mm taper shank) | $ 970.00 |
| 193-100 | ADJUSTA-V (with 40mm taper shank) | $ 970.00 |
| 050-100 | EDGE-MASTER (with clamps and support blocks) | $1150.00 |
| 50-06 | 3" DIAMETER FLUSH CUP | $ 58.00 |
| 50-07 | 2" DIAMETER FLUSH CUP | $ 55.00 |
| 50-08 | 1" DIAMETER FLUSH CUP | $ 52.00 |
| 235-100 | HO-VEE RISER (with 8" posts) | $1040.00 |
| 235-10 | BASIC V-BLOCK (with strap clamp) | $ 260.00 |
| 235-20 | MULTI-6 V-BLOCK (with strap clamp) | $ 690.00 |
| 235-40 | 10" POSTS (set of 2) | $ 125.00 |
| 035-100 | PLANNER-GAGE (with case) | $ 410.00 |
| 045-100 | COMPAC-VISE | $ 350.00 |
| 065-100 | SUPER WEE-BLOCKS | $ 115.00 |
| 095-100 | MAGNA-DRESS | $ 95.00 |
| 110-100 | ADJUSTO-DRESS | $ 270.00 |
| 91004 | DIAMOND NIB (for Magna-Dress & Adjusto-Dress) | $ 32.00 |
TERMS: NET 30
MINIMUM ORDER $15.00
PRICES ARE F.O.B. HARIG MFG. NILES, IL. 60714
PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
REPLACEMENT PARTS ARE AVAILABLE PER SEPARATE PRICE LIST.